All items tagged with measurement microphones (115)
GRAS Launches EQ 40PM EQset Miniature Production Line Measurement Microphone
February 15, 2023 by audioXpress Staff

GRAS Launches EQ 40PM EQset Miniature Production Line Measurement Microphone

GRAS Sound & Vibration announced a new miniature production line microphone, which is the first with the recently announced GRAS EQset technology designed to reduce the risk of measurement errors. The new EQ 40PM EQset, a short 20kHz pressure microphone with a dynamic range from 30dB (A) to 120dB, and the same dimensions as traditional Production Line microphones, is aimed at increasing efficiency and improving test accuracy in the consumer audio and telecom space.
Read more...
New EQset Microphone Technology From GRAS Sound & Vibration
February 1, 2023 by audioXpress Staff

New EQset Microphone Technology From GRAS Sound & Vibration

GRAS introduced a new technology aimed at increasing efficiency and improving test accuracy in the consumer audio and telecom space. The new GRAS EQset Microphone technology is a new advancement that guarantees fixed sensitivity and a flat response curve across all frequencies in every EQset-enabled microphone. Essentially the new EQset technology introduces an equalized microphone, with a flat response curve and uniform fixed gain out of the box, vastly reducing the risk of measurement errors.
Read more...
Rational Acoustics Smaart Adds Integrated Control for Audient EVO Audio Interfaces
December 6, 2022 by audioXpress Staff

Rational Acoustics Smaart Adds Integrated Control for Audient EVO Audio Interfaces

Rational Acoustics and Audient announced the integration between the recently updated Smaart v9 audio and acoustical measurement software and the Audient EVO line of USB-C audio interfaces. The Smaart 9.1 update integrates the controls for phantom power and gain for Audient’s EVO devices - EVO 4, 8, and 16 - directly from within the Smaart interface. Additionally, gain tracking may be enabled to allow for automatic decibel offset recalculation for calibrated inputs.
Read more...
Voice Coil December 2022 Improves Loudspeaker Measurements
November 29, 2022 by Joao Martins

Voice Coil December 2022 Improves Loudspeaker Measurements

Voice Coil December 2022 features an updated directory of Measurement Microphones Vendors, Mike Klasco writes about how to Enhance Low-Frequency Performance, and Vance Dickason reminds us that there is a more realistic way to map speaker resonances. Test Bench characterizes two tweeters from Beyma's new Near and Mid Field (NMF) series: the T-25M 1" aluminum/magnesium alloy metal dome tweeter, and the similar T-25S 1" silk dome tweeter.
Read more...
GRAS Begins Trade-In Campaign on Measurement Microphones
September 13, 2022 by audioXpress Staff

GRAS Begins Trade-In Campaign on Measurement Microphones

GRAS Sound & Vibration, part of Axiometrix Solutions, is implementing a trade-in offer to replace old measurement microphones with new high-quality GRAS microphones. For a limited time, any measurement microphones can be traded-in to GRAS 46AE range microphones with a 35% discount. This includes the GRAS 246AE with SysCheck2, which is a perfect combination with an Audio Precision analyzer such as APx517, or the APx1701 test interface.
Read more...
IK Multimedia Promotes iLoud MTM Immersive Speaker Bundle for Dolby Atmos Configurations
June 23, 2022 by audioXpress Staff

IK Multimedia Promotes iLoud MTM Immersive Speaker Bundle for Dolby Atmos Configurations

Setting up an immersive monitor system in a home studio is now not only possible but also more affordable and reliable. IK Multimedia announce enhanced support for immersive audio, including Dolby Atmos systems based on a multi-unit bundle of its iLoud MTM active monitors, which offer versatile mounting options and a symmetric design. The bundle includes 11 speakers, a measurement microphone, ARC calibration software, and setup guide for easier installation.
Read more...
GRAS Releases 12BE, 12BC, 12BF, and 12BD Microphone Power Modules with TEDS
December 16, 2021 by audioXpress Staff

GRAS Releases 12BE, 12BC, 12BF, and 12BD Microphone Power Modules with TEDS

GRAS Sound and Vibration added four new power modules to its existing line, with the introduction of the GRAS 12BE, 12BC, 12BF, and 12BD Microphone Power Modules aimed at engineers who need to power CCP or LEMO measurement microphones and would like seamless integration of microphone sensitivity via TEDS. These new power modules have the ability to take advantage of the latest GRAS SysCheck2-enabled microphones.
Read more...
GRAS Sound & Vibration Launches SysCheck2 Intelligent Acoustic Sensor System with Built-in Self-verification
November 30, 2021 by audioXpress Staff

GRAS Sound & Vibration Launches SysCheck2 Intelligent Acoustic Sensor System with Built-in Self-verification

Danish measurement microphone specialists GRAS Sound & Vibration, now a part of Axiometrix Solutions, announced two new microphones with SysCheck2 functionality allowing for remote-controlled health check of an entire measurement chain. The new microphones are the GRAS 246AE 1/2" CCP Free-field Standard SysCheck2 Microphone Set, and the GRAS 246AO 1/2" CCP Pressure Standard SysCheck2 Microphone Set, both featuring self-verification.
Read more...
Voice Coil December 2021 Helps You Tune Your Loudspeaker Responses
November 24, 2021 by audioXpress Staff

Voice Coil December 2021 Helps You Tune Your Loudspeaker Responses

In the December 2021 edition of Voice Coil, Vance Dickason details the possibilities of the CrossLite+ DSP filter software, while James Croft reviews an interesting invention to improve the bass response in automotive audio applications. And this edition includes an updated measurement microphone directory, and two interesting low-frequency drivers on Test Bench, with the Dayton Audio Epique MMAG E150HE-44 subwoofer, and the powerful 10NW76 high-SPL woofer from B&C Speakers.
Read more...
IK Multimedia Releases Firmware for Atmos Support in iLoud MTM Monitors
November 18, 2021 by audioXpress Staff

IK Multimedia Releases Firmware for Atmos Support in iLoud MTM Monitors

IK Multimedia released firmware 1.2.0 for its iLoud MTM studio monitors, which adds a selectable 80Hz low-frequency cutoff for use in Atmos and other immersive audio setups. With this much-anticipated update, iLoud MTMs become an even more powerful reference monitor system for all variety of surround sound systems. Having an iLoud MTM immersive setup is an economical but highly effective solution for project and home studios who need to mix and monitor for Dolby Atmos.
Read more...